HOW TO MAKE "LIVING" WATER AT HOME...
Many of us have long been accustomed to using a water filter, because this is how we, at least a little, but purify tap water from various harmful impurities, and turn"dead" water into "live". But water filtrationis not the only way to make "living" water, there are many more ways to filter more efficiently, and we'll talk about these methods today.
According to numerous studies of scientists, it has been proven that the most useful water for humans is melted water or structured water. You probably immediately thought about boiling, because it is customary for us that boiled water is the healthiest, but far from it. Yes, boiling kills all harmful substances present in water, but it also contributes to the appearance of various mechanical particles in the water, as well as salts, chlorine, heavy metals and viruses. Besides, boiled water It is considered "dead" water, and such water will not be able to bring benefits. So let's look for another way to structure water.
As we have already said, melt water is very useful for our body, in addition, frozen water acquires its original structure. And if we also freeze filtered water, we will get a real natural elixir of health, youth and beauty.
So, anyone who has a freezer or freezer can make melt water, and there is a freezer in every home. First filter the water, then pour it into an enameled cup or pan, place it in the freezer and watch for a small ice crust to appear on the surface of the water, which must be removed. Then wait until 2/3 of the water freezes, wash the hole in the ice and drain the water that remained unfrozen at the bottom. Then defrost the ice, and you can enjoy clean, and most importantly, "living" water. But remember that melt water cannot be boiled and frozen again, as it will lose all its beneficial properties. Also, melt water cannot be stored for a long time.
There is another way to make "living" water, this method is easier to use, but no less effective. Pass the tap water through the filter, and then pour a tablespoon of holy water into the clean water. Thus, you will not only make the water “alive”, but also sanctify it, giving it useful properties. It has been proven that a tablespoon of holy water can turn 5 liters of plain water into holy water.
We know about living water from fairy tales. She could heal and even revive people. It turns out that not everything in fairy tales is fiction. Living water exists. Nothing is known about the revival of people, but living water can contribute to the treatment of certain diseases, and positively influence the whole. How to make living water at home?
Method one. Take a deep cup, fill with water and put in freezer. After a while, a crust of ice will build up on top. Remove it and leave the container until completely frozen. Ready ice remove and put to thaw, but not completely. When there is a piece of ice, about half a glass in size, remove it. The remaining water is living water. Together with ice, you will get rid of harmful substances. The properties of water are also influenced by positive emotions. If you are irritated and in a bad mood, do not make water.
The second method, the production of living and dead water, at home, requires basic knowledge of electrical engineering. If you live in a city, then first pass the water through a filter or let it settle. Place two stainless electrodes through the lid into a glass jar. Supply power to one electrode diode D231 or D232. To the other electrode - directly. Place the cathode in a canvas bag. It can be sewn from a fire hose. The water in the jar should be below the edge of the bag. Plug in 220 volts, the process has begun. Never bring to a boil. After a few minutes (from 5-30, depending on the strength), turn it off. Remove the bag carefully so as not to mix with other water. This is living water, let it stand for 30 minutes and you can use it. Shelf life is not more than two weeks. Dead water remained in the jar.
At present, to obtain healing water, it is not at all necessary to look for some mountain springs and reservoirs. It is quite possible to obtain it by electrolysis of ordinary tap water in. From a chemical point of view, living water has alkaline properties and therefore it is excellent for healing wounds. And dead water is a unique disinfectant because it contains acids. When passing through ordinary water, an electric current completely changes its structure.
Accordingly, after treatment with current, the water is divided into two fractions. Each has certain healing properties. It is usually recommended to use living and dead water in combination for maximum results.
Do-it-yourself apparatus of living and dead water
On sale, you can easily find special devices for obtaining activated water. But such a device can be made independently. To do this, you need to take an ordinary glass jar with a lid and fix the electrodes on it with nuts and screws. One of the electrodes will be the cathode and the other the anode. On the positive electrode there will be a release dead water. This means that a bag of dense fabric must be fixed on the anode. For such purposes, calico is ideal. The main thing is that air passes through the fabric normally.
The length of the electrodes for the floor should not exceed 100 mm. Sheet metal can be used as electrodes. Some even use aluminum electrodes to produce charged water. They must be fixed to the cover using a special insulating gasket.
To prepare activated water, you will need to pour the liquid into a cloth bag and attach it to the positive electrode. It is then inserted into a jar of water. It should be borne in mind that the water in the jar should not reach the edge. Usually on living water takes no more than ten minutes. Then the electrodes are pulled out of the jar and dead water is poured into a separate container from a special bag. Water should be poured very carefully so as not to mix the resulting fractions. To obtain activated water, you can also use the design without a fabric bag. Then you need two separate containers with separate edges. It will be possible to provide electrical contact between the two containers using a cotton cord wrapped in gauze.
According to research by gerontologists, the main cause of aging is various environmental factors and, first of all, the water we drink.
Scientists conducted a series of studies and came to the following conclusion about the effect of water on the aging process:
Humans will live to 150 if they keep their genes intact as much as possible
First of all, genes are destroyed by poor-quality water, overeating, eating food that is difficult for the body to digest. In the Himalayas, a group of scientists studied the melt water of glaciers. It turned out that it is very useful for humans, because it protects genes from damage, due to which the life expectancy of the mountain population, constantly consuming melt water, is 100-120 years. If people from the city drink it, they will live up to 150. According to scientists, the melt water contains an “anti-aging gene”
How to prepare living water?
Ordinary tap water, pour into a saucepan and put in the freezer. We are preparing melt water.
Melt water is living water.
We know perfectly well that people who constantly use pure melt water, for example, mountain dwellers, live much longer than city dwellers, while not knowing anything about immunity problems, the need for vitamins, and a whole bunch of different diseases. Melt water improves metabolism, promotes cleansing and rejuvenation of the body.
What does melt water do in the body? The fact is that melt water has an even, clear structure, similar to that of a human cell, therefore it is perceived by the body as a related close product. Once in the body, melt water displaces and replaces old cells that have exhausted their potential, and thus sharply speeds up the metabolism, contributing to a fairly rapid cleansing and rejuvenation of the body. In addition, melt water, due to its large internal energy potential, gives a person a lot of strength, vivacity, and energy. It has been repeatedly noted that people who drink melt water become not only healthier, but also more efficient, brain activity, labor productivity, and the ability to easily solve difficult problems increase.
What to do to a person who lives far from natural sources. No need to get upset. This water can be prepared at home.
How to prepare melted (protium) water
This technology for obtaining clean, biologically active drinking water was proposed by hydraulic engineer Aleksey Labza, for which we bow to him.
To prepare protium water, it is better to take clean water. If you use tap water, it is advisable to filter it with a household filter. filtered water in plastic bottle, preferably in enamel saucepan place in the freezer. In winter - on the balcony, it's even better. After a while, the water will freeze. Molecules of heavy water are concentrated in this ice, freezing at a temperature of +3.8 C. Therefore, we pour the unfrozen water into another container and expose it to frost again. And we simply throw away the frozen water from the first pan. After the water freezes by about 2/3 in a saucepan exposed to frost, pour out the unfrozen water: it contains the chemical impurities of our civilization and excess mineral salts. The ice remaining in the pan is frozen protium water. It is thawed before use only when room temperature. In no case should it be heated, as it will be lost. medicinal properties. You immediately palatability you will feel the difference between melted water and the one you usually drink.
How to improve healing properties water?
Expose it to the sun for several hours so that the water is charged with the energy of the Sun and the sky. Thus, you will give it the properties of living water. Living water is water that is in the open air: rivers, lakes. Dead - flows underground, and you drink it every day from the tap. Living water penetrates everywhere and animates everything. Dead water has the opposite properties. It stops all processes in the body, everything freezes and stops. Water of eternal sleep. It will be especially good to expose water at night under the open sky during Christmas.
Put a few silicon crystals in it, so that later the health would be silicon. Or nourish with silver by dropping a silver thing into a vessel.
The remaining water is that useful and healing liquid about which there are legends and legends.
When using this water for cosmetic purposes, wrinkles are smoothed out, wounds and ulcers heal, the skin is rejuvenated; vitality organism, all organs and tissues are cleansed and healed.
The properties of melt water are preserved for 7-8 hours after ice is defrosted, but in order to obtain a noticeable healing effect, it is better to drink melt water immediately after defrosting. At the same time, its temperature should not exceed 10 ° C (small ice floes can still float on its surface). It is useful to drink at least 2-3 glasses of such water a day. A noticeable effect is observed even with daily consumption of ¾ cup of melt water in the morning on an empty stomach.
I wish you all, my dears, excellent health and longevity!
Living water - how to cook?
Unique water activation technology. Breakthrough in knowledge about bioenergetics.
"Living" and "dead" water is produced by electrolysis of ordinary water, while acidic water, which is collected at a positively charged anode, is called "dead", and alkaline, which is concentrated near the negative cathode, is called "live".
Dead water, or anolyte, is a colorless liquid with an acid smell, but it tastes sour and slightly astringent. Its acidity ranges from 2.5 to 3.5 pH. It retains its properties for 1-2 weeks when stored in closed containers. Dead water is an excellent bactericide, disinfectant. She can rinse her nose, mouth, throat with colds, disinfect linen, furniture, rooms and even soil. It relieves blood pressure, calms the nerves, improves sleep, reduces joint pain, and has a dissolving effect. It is useful to rinse your mouth with it after eating - the gums will not bleed, the stones will gradually dissolve.
Living water, or catholyte, is an alkaline solution and has strong biostimulant qualities. It is a very soft, colorless liquid with an alkaline taste, pH = 8.5 - 10.5. After the reaction, precipitation falls in it - all water impurities, incl. and radionuclides. If stored in a closed container in a dark place, it can be used for two days. She recovers beautifully. immune system body, provides antioxidant protection, is a source of vital energy. Living water activates all the biological processes of the body, increases blood pressure, improves appetite, metabolism, and general well-being. It justifies its name everywhere. Even withered flowers come to life when placed in a vase of living water.
Water is characterized by two very important parameters: pH and redox potential (redox potential). pH characterizes the acidity of the medium. If the pH is above 7, the environment is alkaline; if it is lower, it is acidic.
Acid-forming foods: meat products, white flour products, sugar, fish and seafood, cottage cheese, cheese, nuts and seeds, cereals, baked goods, ice cream, eggs, all alcoholic beverages, pasteurized juices, coffee, tea, lemonade, Coca-Cola etc.
Alkaline-forming foods include: fruits (except canned), vegetables, herbs, natural yogurt, milk, soybeans, potatoes.
Almost all diseases have one cause - too oxidized body.
Since our blood has a pH in the range of 7, 35 -7, 45, it is very important for a person to drink water with an alkaline pH every day, that is, living water. Dead water acidifies our body, living water, on the contrary, alkalizes. All internal environments must be alkaline, otherwise the body fails. If the pH of a person's blood drops to 7.1, then he dies.
The redox potential (ORP) indicates whether a product is an oxidant or an antioxidant. ORP is measured in millivolts using special devices: redox testers. Negative values of the ORP of water (or another product) mean that when it enters our body, it donates electrons, i.e. it is an antioxidant. Positive values mean that such water (or other product) takes electrons when it enters the body. This process contributes to the formation of free radicals and is the cause of many serious diseases.
Water with negative ORP values and alkaline pH (living water) has pronounced healing properties and is recommended for daily use.
ORP and pH values for different types water:
- living water: ORP = -350...-700, pH = 9.0...12.0;
- fresh melt water: ORP = +95, pH = 8.3;
- tap water: ORP = +160... +600, pH = 7.2;
- black tea: ORP = +83, pH = 6.7;
- mineral water: ORP = +250, pH = 4.6;
- boiled water, after three hours: ORP = +465, pH = 3.7.
OBTAINING LIVING AND DEAD WATER
Living and dead water at home can be prepared using devices called live and dead water activators. Now there are many different kinds of devices on the market (AP-1 made in Belarus, Melesta - made in Ufa, Zhivitsa - made in China), there are home-made devices using a fire hose, there are also officially manufactured by various enterprises.
The device for the preparation of "Living and Dead Water" AP-1
Household electric water activator AP-1 is a lightweight, compact device that allows everyone at home to get about 1.4 liters of activated ("live" and "dead") water in just 20 - 30 minutes. The device is not complicated, electrically safe and reliable.
The device for the preparation of "Living and Dead Water" - "Melesta"
This device is made of cheaper materials than AP-1: instead of a ceramic glass, a fabric one is used (acts as a diaphragm), and instead of 4 electrodes made of high-quality alloys, the usual 2 electrodes made of food steel are used. The water obtained by this device has all the properties that the water prepared on the AP-1, so it can be recommended to everyone without exception for home use.
Device for preparing "Alive and Dead" water "Zdravnik".
The device is very easy to use, does not require special care and maintenance. Food-grade stainless steel is used as electrodes, electrical safety requirements are met. As well as AP-1, it has two versions:
- classic, time-tested version of the device using a fabric cup for dead water;
- version with the use of a glass for dead water, electroosmotic from nanostructured ceramics.
Choose a device in which the anode is made of a non-destructible material, or a degradable, but environmentally friendly one, such as silicon. Make sure that the device has a sensor for monitoring the quality of the water received. So, for example, a catholyte with an ORP of less than -200 mV is ineffective, and with an ORP of more than -800 mV it has a depressing effect. The therapeutic ORP level is about -400 mV. In no case do not use a home-made device, since it is impossible to ensure the required water quality with its help.
PROPERTIES OF LIVING WATER
"Alive" water is called, which, when exposed to the body, causes favorable changes in it: metabolic processes in living tissues are intensified, improving well-being, reducing susceptibility to adverse factors and improving overall health. Living water is characterized by the following properties:
1. High level pH (alkaline water) - catholyte, negative charge.
2. It is a natural biostimulant, remarkably restoring immunity, providing antioxidant protection to the body, being a source of vital energy.
3. Living water stimulates metabolism, improves blood circulation in tissues, increases blood pressure in hypotensive patients, improves appetite and digestion.
4. Promotes the regeneration of the mucous membrane of the colon with a full restoration of bowel functions.
5. Living water is a radioprotector, a powerful stimulator of biological processes, has high extracting and dissolving properties.
6. Helps improve the detoxifying function of the liver.
7. Living water provides rapid healing of wounds, including bedsores, burns, trophic ulcers, gastric and duodenal ulcers.
8. Smoothes wrinkles, softens the skin, improves appearance and hair structure, copes with the problem of dandruff.
9. Living water stimulates the transfer of oxygen and electrons from the external environment to the cells, which normalizes the redox and metabolic processes in cells. This increases the activity of blood cells, tones the central nervous system and striated skeletal muscles.
10. Promotes the rapid extraction of useful substances from something, therefore herbal tea and herbal catholyte baths are especially useful, as herbs are better brewed. Catholyte food is much tastier and healthier. The extractive property of living water is manifested even when low temperatures. The extract, brewed on catholyte at a temperature of 40 - 45°C, preserves all useful material, while when extracted with ordinary boiling water, they are lost.
11. Helps to reduce or even completely get rid of the effects of radioactive exposure.
PROPERTIES OF DEAD WATER
Dead water slows down metabolic processes. According to the disinfecting effect, it corresponds to the treatment with iodine, brilliant green, hydrogen peroxide, etc. But, unlike them, it does not cause a chemical burn of living tissues and does not stain them, i.e. is a mild antiseptic. Dead water has the following properties:
1. Low pH (acidic water) - anolyte, positive charge.
2. It has antiseptic, anti-allergic, drying, antihelminthic, antipruritic and anti-inflammatory properties.
3. When used internally, dead water lowers blood pressure in hypertensive patients, regulates the flow area of blood vessels and improves drainage through their walls, eliminates blood stasis.
4. Promotes the dissolution of stones in the gallbladder, bile ducts of the liver, kidneys.
5. Dead water reduces joint pain.
6. It has a mild hypnotic effect on the central nervous system, reduces muscle tone. When taken, drowsiness, fatigue, weakness are noted.
7. Dead Water Improves Elimination harmful products the vital activity of the organism. Perfectly cleans it inside and out.
8. Restores the functions of the sweat, salivary, sebaceous, lacrimal glands, as well as the endocrine glands and the gastrointestinal tract.
9. Dead water, acting on the skin, helps to remove dead, keratinized epithelium, restoring local receptor fields of the skin, improving the reflex activity of the whole organism.
10. Enhances the effect of radiation, so it is not recommended to use dead water inside in sunny summer days, as well as people living in areas contaminated with radiation.
When mixing living and dead water, mutual neutralization occurs and the resulting water loses its activity. Therefore, when ingesting live and then dead water, you need to pause between doses for at least 2 hours.
APPLICATION OF LIVING AND DEAD WATER
In medicine, electroactivated solutions, both anolytes and catholytes, are widely used. When ingesting activated water, a single average dose for an adult is usually 0.5 cups (unless otherwise indicated in the recipe).
Between taking medications and taking activated water, it is necessary to pause for 2-2.5 hours, but it is better to minimize the use of chemical drugs or refuse them altogether.
Unless otherwise indicated in the prescription, the activated water should be taken internally 0.5 hours before a meal or 2-2.5 hours after a meal. During the treatment period, it is not recommended to eat fatty and spicy foods, and it is also necessary to completely abandon the use of alcoholic beverages.
Before carrying out wellness procedures, it is desirable to heat the water to a temperature of 35 - 37 ° C. This should be done over low heat, in ceramic or glassware, in a water bath (i.e. not on direct fire, especially not on an electric stove). Do not bring to a boil, otherwise the water practically loses its useful properties.
When using activated water, you need to regularly monitor the acid-base balance of the body. The surest indicator is the human eye. With a normal acid-base balance, the color of the conjunctiva (corner of the eye) is pale pink. With strong acidification - light, almost white. With a significant alkalization of the body, the corner of the eye has a bright red color.
Of course, a doctor's consultation is necessary, especially if you need to make a correct diagnosis, because the main thing is not to harm yourself and others.
Prostate adenoma: one hour before meals, drink 0.5 cups of live water 4 times a day, ( last time- at night). If the blood pressure is normal, then by the end of the treatment cycle, you can drink a glass. Sexual intercourse should not be interrupted. The entire treatment cycle is 8 days. If a second course is needed, then it is carried out one month after the first cycle, but it is better to continue treatment without interruption. In the process of treatment, it is useful to massage the perineum and enemas from warm living water. It is also advisable to put candles from a bandage moistened with living water. The pain disappears in 4-5 days, the swelling and the urge to urinate decrease.
Allergy: it is necessary for three days in a row, after eating, rinse your mouth, throat and nose dead water. After each rinse, after 10 minutes, drink 0.5 cups of live water. Rashes on the skin (if any) moisten with dead water. The illness usually goes away in 2-3 days. The procedure is recommended to be repeated for prevention.
Angina: for three days, gargle with dead water 5 times a day. After each rinse, drink 50 ml of live water. The temperature decreases in one day, the disease stops on the third day.
Bronchial asthma, bronchitis: rinse your mouth, throat and nose with heated dead water 4-5 times a day for three days. 10 minutes after each rinse, drink 0.5 cups of live water. If there is no noticeable improvement, do an inhalation with dead water: heat 1 liter of water to 70 - 80 ° C and breathe it in steam for 10 minutes, repeat 3 - 4 times a day. The last inhalation can be done with living water and soda. Decreased urge to cough, improves general well-being. If necessary, repeat the course of treatment.
Hemorrhoids: Gently rinse anus, tears, knots warm water with soap, wipe dry and moisten with dead water. After 7 - 8 minutes, make lotions with a cotton-gauze swab dipped in living water. This procedure, changing tampons, repeat during the day 6 - 8 times. Drink 0.5 glass of live water at night. Within 3-4 days the bleeding stops, the ulcers heal.
Influenza: during the day, rinse the nose and mouth with dead water 8 times, and drink 100 ml of live water at night. The flu disappears within a day.
Toothache, periodontal disease: rinse your teeth after eating with warm dead water for 15-20 minutes. When brushing your teeth, use live water instead of ordinary water. With periodontal disease, rinse your mouth after eating with dead water several times. Then rinse your mouth alive. Brush your teeth only in the evening. Do the procedure regularly. The pain usually goes away quickly. If there are stones on the teeth, brush your teeth with dead water and rinse your mouth with live water after 10 minutes. Gradually, tartar disappears and gum bleeding decreases.
High blood pressure: morning and evening before meals, drink 0.5 cups of dead water "fortress" 3 - 4 pH. If it does not help, then after one hour drink a whole glass. Pressure normalizes, calms down nervous system.
Low blood pressure: in the morning and evening before meals, drink 0.5 cups of live water with pH = 9 - 10. The pressure normalizes, a surge of strength appears.
Polyarthritis, arthritis, osteochondrosis: a full cycle of treatment - 9 days. 3 times a day 30-40 minutes before meals drink:
- in the first and last three days, 0.5 cups of dead water;
- 4th day - break;
- on the 5th day - 0.5 glass of live water;
- 6th day - break.
If necessary, this cycle can be repeated after a week. If the disease is advanced, then it is necessary to apply compresses with warm dead water to the sore spots. Joint pain disappears, sleep and well-being improve.
Radiculitis, rheumatism: for two days, 3 times a day, half an hour before meals, drink 0.75 cups of live water. Rub heated dead water into sore spots. The pain disappears within a day or even earlier, depending on the cause of the exacerbation.
Expansion of veins, bleeding: wash swollen and bleeding parts of the body with dead water, then moisten gauze with live water and apply to swollen and affected parts of the veins, drink 100 ml of dead water, and after 2 hours start taking 100 ml of live water 4 times with an interval of 4 hours. Repeat the procedure for 2-3 days. The areas of swollen veins resolve, the veins heal.
Diabetes, pancreas: constantly drink 0.5 cups of live water 30 minutes before meals. Useful massage of the gland and self-hypnosis that it releases insulin. The condition is improving.
Cholecystitis (inflammation of the gallbladder): for 4 days, 3 times a day, 30-40 minutes before meals, drink 0.5 cups of water: 1st time - dead, 2nd and 3rd times - alive. Living water should have a pH of about 11 units. Pain in the region of the heart, abdomen and right shoulder blade disappear, bitterness in the mouth and nausea disappear.
Erosion of the cervix: douche at night with dead water warmed up to 38 - 40 ° C. After 10 minutes, repeat this procedure with live water. Further, repeat washing with live water several times a day. Erosion resolves within 2-3 days.
Ulcer of the stomach and duodenum: within 4 - 5 days, one hour before meals, drink 0.5 cups of live water. After a 7-10 day break, repeat the treatment. Pain and vomiting stop on the second day. Acidity decreases, the ulcer heals.
STORAGE
If you store living water in a closed glass container filled under the lid in a dark place, then it retains its healing properties for a day. But it should be borne in mind that it retains the maximum healing effect for the first three hours after preparation.
Dead water retains its active healing properties for a week if stored in a closed glass container in a dark place.
You can not store "live" and "dead" water in the refrigerator. This is due to the vibration of the refrigerator and its magnetic field. Also, you can not put jars with such water nearby (distance
http://www.ukzdor.ru/zhivaya_voda.html
neofizika.ru
http://subscribe.ru/group/zvyozdnyij-put/3908940/
Every person dreams of a long and happy life, which is not overshadowed by various ailments. And this desire has always sought to fulfill traditional medicine. She has vast experience in studying medicinal plants and created many recipes that relieve various diseases.
One of the proposed folk medicine miraculous means is water, which is called living and dead. Remember how in fairy tales, when with the help of this means they resurrected a dead hero? First, it was sprinkled with dead water, and then with living water.
Application history
The gifts of nature have long been used by man in medicinal purposes. One of them, which deserves special attention, is “life-giving water”. Even in ancient manuscripts, researchers found a mention that during their military campaigns along the mountain ranges of the Pamirs, the Caucasus and the Tien Shan, Alexander the Great found a source of healing water. He filled the jug with liquid, but his daughter stole it and poured it on herself. As a result, she became invisible and immortal.
There is also information that many Popes, Chinese emperors and other powerful people organized expeditions in search of an elixir that would allow them to obtain immortality. All these tales and legends are a clear confirmation that our ancestors knew about the existence of living and dead water.
Sources
Today, living and dead water can be made with your own hands. And in ancient times, people took it from natural sources.
The dead was in stagnant lakes and swamps. This liquid was not taken internally. It was used only by healers for various external potions. Alive is considered the water of mountain rivers, glaciers and waterfalls. They drank it, and also used it in the preparation of various medicines.
Modern research
Today, in order to obtain a healing liquid, there is no need to look for its sources. To do this, it is enough to make an apparatus of living and dead water at home. When it is used as a result of hydrolysis, the so-called activated water is obtained.
The properties of this liquid were studied by Soviet scientists back in the 80s of the 20th century. However, the results of all experiments and experiments for the general public were simply classified. However, everything secret sooner or later becomes clear. After some time, doctors and folk healers learned about the results of the experiments. And here the work of Western researchers played an important role. Their results could be read in published scientific articles.
Studies have shown that living water, also called catholyte, becomes negatively charged due to hydrolysis. Such a transformation contributes to its high regenerative and immunostimulating properties. This makes it possible for the liquid that has undergone the process of hydrolysis to become healing and be used to get rid of many ailments.
The unique properties of such water were confirmed by the Pharmacological Committee of the USSR. At the same time, it was said about its absolute harmlessness not only for external, but also for internal use.
The water accumulated after electrolysis near the positive electrode is called anolyte. Her unique properties were known to folk healers from time immemorial. Thanks to this water, people managed to escape from rotting wounds and bedsores.
Getting healing liquid
In order to get activated water, you do not need to look for some distant and sometimes inaccessible sources. To do this, just open the tap and use a special device.
Based on the basic concepts of chemistry, living water has alkaline properties. They also contribute to the healing effect. The properties of dead water are acidic. That is why it exhibits a disinfecting effect.
An electric current passing through ordinary water radically changes its internal structure. At the same time, it erases harmful environmental information in the liquid. After such treatment, water is divided into living and dead. Moreover, each of these two fractions has medicinal qualities.
Experiments on the use of activated liquid
The first apparatus of living and dead water in our country was invented by N. M. Kratov. The idea of creating this device came to the author not by chance. In 1981, Kratov was treated in the hospital. There he was diagnosed with prostate adenoma. Simultaneously with this pathology, he suffered from an inflammatory process in the kidneys. The course of treatment in the hospital lasted for a month, but did not bring tangible results. That is why the doctors offered Kratov an operation. He refused surgery and was discharged home.
At the same time, Kratov's son suffered from a long-term non-healing wound. And the author, who created the apparatus of living and dead water, began to test the properties of the healing liquid on the affected area on the son's skin. The results were not long in coming. The wound healed over two days. Such success inspired the inventor. He began to take such water himself, and soon improved his health. Together with the adenoma, sciatica and swelling of the legs left him.
Application area
In addition to Kratov, the healing properties of such water were studied by G.D. Lysenko, as well as a number of other authors. As a result of the research, it became obvious that water, both living and dead, can save a person from almost fifty items. various diseases, starting with a sore throat and ending with a stomach and duodenal ulcer.
This list also includes such common diseases as colds and flu, runny nose and sciatica, hypertension, etc.
Making at home
In order to use the healing liquid, it is enough to make an apparatus of living and dead water with your own hands. Of course, such devices are easy to find on sale. Buying and delivering them is not difficult.
However, the acquired apparatus for obtaining living and dead water, upon its detailed consideration, has a rather simple design. This suggests saving money. After all, the price of such a device is not so small. It is much easier to make an apparatus of living and dead water with your own hands. It only takes a little time and a small amount materials. The skill of our masters is always present.
Main details
In order to build an apparatus of living and dead water with your own hands, you will need:
Glass jar;
- diode bridge rectifying mains voltage;
- a pouch made of waterproof fabric;
- two electrodes;
- network cord.
With the help of skillful hands, all these details can easily turn into a home-made apparatus of living and dead water.
electrodes
This part must be made of food grade stainless steel. Salad bowls that have remained in the house since Soviet times are great for this role. But if they are not, then any dishes made from stainless steel will do. A graphite rod can be used for the anode.
If the apparatus for preparing live and dead water is assembled using a half-liter jar, then the length of the electrodes should be 100 mm. However, this volume can be increased. A jar in order to create an apparatus of living and dead water with your own hands, you can take a three-liter one. In any case, the electrodes can be extended. Their size should be such that the distance between the metal and the bottom of the glass container is at least 5-10 mm.
Sheets of stainless steel suitable for the manufacture of the anode and cathode should be 0.8-1 mm thick. Some craftsmen claim that the apparatus for making living and dead water was created by them using aluminum electrodes.
Pouch
This detail will be needed to separate the resulting water fractions. As a rule, a tarpaulin is taken to make a bag. It can be a piece from a fire hose or a gas mask bag. But in any case, the material for the bag should not contain any impregnations. In order to make sure that there are no foreign substances, the cooked piece must be placed in water and boiled. The components used in the impregnation will reveal themselves when heated.
The length of the finished bag must be in full accordance with the height glass jar, which is used to create the device. When cutting this part, cut off the required length of the tarpaulin. The bottom of the bag is sewn up with a piece of the same material or food plastic is inserted.
Instrument assembly
The scheme of the apparatus that receives living and dead water is quite simple, and you can familiarize yourself with it in the article. To assemble the device, a U-shaped cut is made on the positive electrode. It is necessary for placing a cloth bag on the anode. It will collect dead water. On the cathode, such a cut is not necessary.
Both electrodes are attached to the jar using an ordinary nylon lid. However, there is one trick to be applied here. Due to the fact that such covers have little mechanical strength, it is best to fix the electrodes on them using an insulating sealing gasket. This will avoid the unpredictability of their behavior in the process. Such gaskets are made of fiberglass (without foil) or any plastic. This part has the form of a rectangle with rounded ends. Two holes are cut out on it, the diameter of which coincides with the diameter of the electrodes. The gasket is mounted on a plastic cover. During operation, when living water and dead water are formed, the device emits gases from the liquid. For their exit, an additional hole is provided in the lid.
Next, a rectifier diode bridge is attached to the electrodes. In this case, it is important to mark the positive and negative outputs to the plate (“+” and “-”). For safety, the bridge can be covered with a lid. In the case of a threaded diode, the thread must be attached to the positive electrode.
There is another way to assemble such a circuit. It can be done with a rectifier bridge. In this case, living and dead water will be produced even more intensively. The device (reviews from craftsmen confirm this) will become four times more powerful. Accelerating the process of preparing a healing liquid is especially important with its systematic use.
A power cord with a plug is connected to the diode bridge. Its length should be at least 500-700 mm. At the same time, it is important to isolate all open electrical connections, because for the process, which results in living water and dead water, the device consumes an alternating voltage of 220 V. Next, the electrode, which is marked with a minus sign, is placed in a canvas bag, poured into a jar water, and the whole structure starts working when connected to the electrical network.
Water preparation
Getting a healing liquid is quite simple. To do this, pour water into a cloth bag. Next, a positive electrode is placed in it. The whole structure is immersed in a jar of water. And there are some nuances here too. Water in a jar should not be filled to the brim. It should be slightly below the top edge of the bag.
The whole process takes no more than 5-10 minutes. Next, the electrodes are removed from the jar. This must be done very carefully. Otherwise, there will be a mixture of the two resulting fractions. At the end of the process, water from the cloth bag is poured into a separate bowl.
Assembling an instrument with a different design
Due to the need for careful handling of the obtained fractions, this device is not very convenient. In addition, certain safety precautions must be observed when the apparatus of living and dead water is operating.
The instruction to it warns that all manipulations for pouring water and removing the final product must be done without plugging the device into a power outlet.
A device that does not provide for the use of a cloth bag is considered more convenient. In this case, you will need to take two containers. However, banks are not suitable for this. Such containers are distinguished by the absence of a neck and sheer straight edges. The design of the electrodes in such a device remains unchanged. The only difference between this apparatus is that the anode and cathode must be installed in separate containers. Electrical contact must be ensured between the electrodes. To do this, they are connected with a cotton cord wrapped in gauze, which is pre-soaked in water. Such a detail will allow the ions to move freely. As a result of the operation of the device, both living and dead water will be produced. And each of them can be seen in a separate container. This allows at the end of the work to simply disconnect the installation from the network and get the anolyte and catholyte immediately, and in the same volumes.
In the scheme of this design, as in the previous version, it is desirable to use a light bulb with a power of 15 watts. They are usually used in sewing machines and refrigerators. If the electrodes are short-circuited, the light bulb will play the role of a fuse, and if the process does not have any failures, it will be an indicator. At the beginning of water production, the light from it will be bright enough. Toward the end of the process, the light will begin to dim. The signal of the end of the production of activated water will be its complete shutdown.
Rules for the use of healing water
The catholyte prepared in the device is an alkaline solution with a bluish tint. It is a clear soft liquid with an alkaline taste with a pH of 8.5 to 10.5. Catholyte, or living water, is able to retain its medicinal properties for at least two days. Only in this case it is important that the storage conditions are observed. Living water should be in a closed container and in a darkened room.
The analyte has a yellowish tint. In addition, the difference between dead water and living water lies in its astringent sour taste and somewhat acidic aroma. The anolyte retains its properties for half a month. But this only happens when it is stored in a closed container. The acidity of such a liquid is from 2.5 to 3.5 pH.
Before use, activated water should be heated. However, some caution must be exercised in doing so. Water must be poured into a ceramic or enamelware and heated over low heat. The use of an electric stove will cause the loss of its useful properties. It is strictly forbidden to bring such water to a boil. In this case, it also becomes useless.
If both dead and living water are used at the same time, then between their receptions you need to take a break of at least one and a half hours. In the case of topical application, the pause is much shorter. It is only 10 minutes. Such a scheme of administration can be explained by the fact that when the analyte and catholyte are mixed, they are neutralized. As a result, the healing liquid simply loses its activity.
