Ice outdoor decorations or ice Christmas decorations for the street. How to make clear ice at home: four proven ways to freeze

Western countries For a long time they have been practicing decorating for the New Year not only the interior of houses, but also the streets, paying special attention to the decor of the backyard territory. For example, icy New Year's decorations for the street are very popular with them, but such decor is quite suitable for our latitudes. Moreover, making street decorations from ice is very easy, as well as fun, entertaining and completely inexpensive. In fact, to make ice outdoor decorations, you will need water, a couple of decorative elements (we will discuss this in more detail below), a suitable mold, as well as a capacious freezer or severe frost outside.

How to make street decorations out of ice.

How to make an ice wreath.

Festive wreaths can decorate the branches of trees or shrubs.

Method number 1. We take finished form for pudding with a vertical insert in the center. We spread bright berries and green twigs (spruce, fir or arborvitae) along the bottom of the form, fill the form with water. We send the form with water to the freezer, until the water completely solidifies. After the water turns into ice, pour into a bowl hot water and immerse the form with ice in it, with a sharp change in temperature, the ice inside the form will melt along the edges, and you can easily pull out the wreath. Backwardness is only to hang a wreath on a satin ribbon.

Method number 2. We take ready-made small forms for puddings, lay out the composition from the berries and branches of the arborvitae on the bottom, fill each mold cold water and put in the freezer. After the water turns into ice, the form can be immersed in hot water for literally one minute, pull out miniature wreaths and hang them on trees with ribbons.

Method number 3. In the center of a round deep shape, we set a glass or a jar, put twigs, berries, leaves, citrus peels around, and pour in water. To prevent the jar in the center from floating into it, you can pour water or pour stones. It remains to set the form in the cold, wait until the ice hardens, pull out the wreath and hang it on a ribbon.

Method number 4. In a baking dish with a vertical insert in the center, lay out acrylic snowflakes and Christmas balls, pour in a little water, put the product in the freezer. When the first layer of water freezes, lay out a few more balls in a circle, pour water again and put in the freezer, after freezing add more balls and last time put the mold in the freezer, take out the wreath, tie a ribbon and hang the product on a street tree.

Photo of ice wreaths.

How to make ice balls.

Method number 1. Preparing required amount balloons, pour water into them and pour food coloring, mix the water inside by shaking the balls. We tie the balls and set them in the freezer or on the street frost. When the water inside the balls hardens, cut the shell with a knife and take out the colored ice balls.

Method number 2. You will need a special form for making ice balls (for drinks), you can put berries or sprigs of spruce on the bottom of this form, as well as put hanging ropes, pour in water and put in the freezer until completely solidified.

How to make an ice candlestick.

Method number 1. In the center of the food container we put a glass with stones (for weighting). We pour in water and lay sprigs of spruce or arborvitae on top, and also pour viburnum, lingonberry or dogwood berries. We put the mold in the freezer, after the water hardens, we take out the candlestick and put a lit candle in the center.

Method number 2. We take two different-sized bottles of 1.5 liters and 0.5 liters, cut each bottle in half, put the smaller bottle into the larger one, fix them with adhesive tape, put berries, leaves and tree branches between the walls, pour in water, and send the product into the freezer. After turning the water into ice, we take out the future candlestick from the mold, and put a lit candle inside.

Photo of various ice candlesticks.

Ice tree pendants.

Round flat pendants are made as follows, laid out on the bottom of a flat round plate various berries, twigs or flowers, everything is filled with water, a pendant thread is laid on top, the composition is placed in the freezer, then pulled out, separated from the plate and hung on the trees.

Ice stars.

To make stars, you can use ice molds in the form of stars or baking dishes, to create regular stars, fill the molds with water and freeze in freezer.
To create colored stars, you must first add food coloring to the water.
For bright compositions, you can put berries, various twigs, leaves, or add glitter into the molds.

Ice cubes.

We lay out various flowers or fruit slices in square-shaped ice molds, pour water here and freeze. Then we take out the ice cubes and decorate them with street flowerpots, tree branches and other yard elements.

Ice shards.

We paint the water blue, pour it into a rectangular shape in a thin layer, send the mold to the freezer, after hardening, hit the ice surface with a kitchen hammer, select beautiful fragments and put them somewhere on the street.

Frozen heart.

Method number 1. At the bottom of a round plate, lay out the pebbles in the form of a heart, fill it with water and put it in the freezer, then take out the product and place it with an edge on a flat surface.

Method number 2. Put the berries in a heart-shaped baking dish and pine needles, we send the form to the freezer, then we take the product out of the form and put it somewhere in a conspicuous place in the yard.

How to make ice garlands.

In the ice mold, lay out a dense woolen thread in a circle, pour in water, and put the mold in the freezer, after the water hardens, gently pull the end of the rope, all the ice should pop out of the mold. To get a colored garland, the water must first be tinted with food coloring.

Instead of an ice mold, you can take the base from a box of chocolates.

How to effectively decorate the house for the New Year:

Christmas decorations made of ice will help you quickly, simply and inexpensively decorate the site for the upcoming holiday. If you have not yet tried to create street decorations from ice, then we recommend that you urgently correct the situation, we assure you that you will definitely like this pastime.

The website "Dekorol" reminds its readers that you have the opportunity to receive notifications regarding the release of new reviews to your mail (fill out the subscription form in the sidebar).

With the onset of winter, the suburban area turns into a white desert and is no longer so pleasing to the eye and warms the soul. A transparent sparkling miracle - an ice sculpture - can revive the virgin snow. If complex compositions are only possible for a master, then simple shapes on the shoulder and non-specialist amateur, inspired by a creative idea.

You went out of the house to the street and looked at the figure of a rooster made of ice - a smile and a comfortable New Year's mood appeared on your face.

Step-by-step steps for creating ice figures

In the process of creating an ice sculpture, there are 5 main steps:

Step 1. Procurement of material.

Ice for creating ice figures must be clean, transparent, without any impurities, that is, one that can transmit light. This ice cannot be created at home from tap water, it turns out cloudy and not sparkling. Suitable ice can only be created by nature, it is cut from the frozen surface of lakes or quiet backwaters of rivers and sent to customers.

Take advice. Use the services of professional ice makers. These specialists are able to extract ice blocks of various sizes without breaking them.

Step 2. Preparing the tools.

Most of the tools that are used to create ice sculptures do not require special manufacture, these are chainsaws, electric saws, wood chisels of various shapes. But each master has an individual set, which he created himself to solve the problems that arise during the construction of the sculpture. An example of such tools is a chisel with a semicircular sharpening, for making particularly complex patterns, or (biter) for removing large masses of ice, resembling a metal comb, which are not found in the standard set of tools.

The absence of own-made tools does not mean at all that it is impossible to create ice splendor on your site with an ordinary tool.

Advice. All tools, and especially chisels, must have perfect sharpening, since any burr can spoil what was planned.

Step 3. Creating an ice figure.

Blocks of ice to create a figure are glued together with water. Water acquires this property at temperatures below zero. So the blocks are erected to the desired height, the seams are rubbed with wet snow so that they become less noticeable.

Chips and scratches on the surface of the ice can be ironed out with a warm, but not hot, iron. If the figure is above one and a half meters, then it must have a solid base, and if it is an ice slide, then a frame, wooden or metal, is used. The frame is strength. When using a frame, it is possible to create very tall sculptures and slides, but the charm is lost, since the frame is visible through the transparency of the ice.

What ice figures will decorate the site, your imagination will tell you: Christmas trees of various heights, Santa Claus with the Snow Maiden, an animal - a sign of the coming year, small slides, an ice table and benches.

Advice. At the summer cottage, it is best to create low, one and a half or two meters, figures with a solid base - for safety reasons and so as not to complicate the work of making the frame.

You can make ice figures by inviting friends with a New Year's mood.

Step 4. Decorating ice figures.

Patterns on the surface of ice figures can be very different: ornament, cutting, and spirals - everything that the sculptor's imagination and skill is capable of, but the sculptor. it is you. Patterns can decorate both the entire sculpture and its various parts.

The combination of patterns looks effective different way manufacturing. One of the ways of decorating is (driving ice): its icy contents are cut out of the figure and dry snow is poured. The combination of transparent and white in the play of sunlight is unforgettable.

It is better to create patterns with the largest number faces. The more facets, the more beautiful the sculpture will look. There is no need to paint the sculptures, they cease to live and become only a bright spot that hurts the eye.

Imagine a goldfish in an uncolored form. And the scales of the fish sparkle in the sun with their scales. The decor will be completely different.

Step 5. Highlighting the ice figures.

Ice is a living material, so ice figures live and play in the rays of sunlight. The sparkle changes every moment depending on the angle of view. At night, the sun can be replaced by electric lamps, which are installed either behind the sculpture, or at its base, or in special grooves that are drilled into the sculpture.

Advice. Do not use incandescent lamps for illumination - they will melt the figures very quickly.

Expand your horizons and watch a video about ice figures created by real artists with rich imaginations.

Thus, even a small original ice figurine will give your site a unique New Year's flavor.

And if you wish, you can build a whole ice town that will delight the eye until spring. Happy New Year, dear readers of my blog!

When visiting a restaurant or bar, you probably noticed that the ice in drinks is absolutely transparent. But at home, for some reason, it turns out to be cloudy and crystallized. If you make ice from water with impurities and gases, then it will be opaque. But do not write off to get upset and run to the store for ice. The site "KnowKak.ru" will tell you how to make transparent cubes at home.

Advice. Use only purified water to freeze ice. Minerals and air molecules must be removed from it. Distilled liquid works well. But you can take water purified with a filter or bottled. Sparkling water is not suitable for making clear ice.

Method number 1 "Boiling"

Prepared water must be boiled 2 times. After boiling, the water molecules are close to each other, displacing the air. When the water boils for the first time, turn off the stove and let the liquid cool completely. Then boil it again. After that, pour boiling water into a separate container, cover it with paper or a napkin. This will prevent dust and debris from entering the water.

Pour completely cooled water into clean and dry. Top them off cling film so that debris and foreign odors do not get into the water.

Place the mold in the freezer for 2 hours or until completely frozen.

When formed, remove the form from the refrigerator and leave it for 5 minutes at room temperature. Then carefully remove the ice.

Method number 2 "Effect from top to bottom"

To freeze ice in this way, you will need, in addition to molds, a refrigerator box or a thermal bag. But only the container should be the size of the freezer. It insulates the ice from low temperatures, allowing it to freeze from top to bottom.

Place freezer trays on the bottom of the container. You can even use disposable cups. Fill the molds with purified water (do not boil it).

Then plain water pour to the bottom of the container, but to the border of the ice molds. Water around will not allow the liquid inside the molds to start to freeze from the bottom and sides. Thus, it will form evenly.

Do not close the container, but only cover it with a towel. Put it in the freezer for a day.

After the specified time, remove the container, then remove the ice block. Lay it on a towel. After a couple of minutes, separate the molds and remove from them clear ice.

Method number 3 "Salt bath"

This option for making ice involves freezing it from the bottom up. So the gas will come out of the liquid before it freezes. But for this it is important to put the molds in cold water. Pour water into a separate container (where an ice mold will fit) and pour a lot of salt.

Salt water freezes at a lower temperature than normal water. Therefore, it will remain liquid, while the water cubes will acquire the state of ice. To cool the brine well, place the container with it in the freezer for 3 hours.

Put the mold in chilled water, pour into it cooled to room temperature boiled water.

Place the structure in the freezer until the ice cubes freeze.

In the future, you can reduce the time for the ice to harden if you keep salt water in the freezer all the time.

like this simple ways you can make clear ice for cocktails at home. Experiment and enjoy chilled drinks!

There is an unbearable heat outside the window, and you are sitting at home and do not know how to quench your thirst so that it is both fresh and pleasant? There are many different ways, but it is much better to make the most delicious popsicles at home. This is one of the most favorite cooling and light desserts of all children and adults, which belongs to the category of ice cream.

The presence of a large selection of this delicacy in supermarkets is simply amazing, however, when buying, you need to be very careful, because manufacturers often add harmless ingredients to its composition, such as dyes, flavors, flavor enhancers. There will definitely be no benefit from such sweetness, only harm to the body and extra centimeters at the waist, since the calorie content is rather big. There is no need to stuff yourself with such a useless delicacy, it’s easier to cook cold dessert with my own hands.

Ice cream, prepared on your own, will not only help you escape from the sweltering heat, but also will not load your body with excess calories. It contains a lot of vitamins and minerals, because they are made from natural ingredients. In this article we will tell you about delicious and healthy recipes this delicacy.

Do fruit ice Even a child can do it at home. Frozen or fresh fruits and berries. You can not do without natural juices. To make the dessert brighter, you can use different juices and fruit purees. Dessert should be frozen in special forms or ordinary plastic cups. Ice molds found in any refrigerator and disposable cups may also work. A treat can be made from several layers to get colored rainbow taste. Having made such ice cream at home, you can surely pamper your children and friends with it. Turn on your imagination and create your own unique recipes. And we will tell you our easy and original recipes.

Fruit ice "Paradise Delight"

It can be prepared from frozen or fresh fruit and berries. If you use frozen foods, they will need to be thawed, washed and allowed to dry with the remaining water.

Ingredients:

strawberries - 500 g;
banana - 2 pcs;
orange juice - 50 ml;
powdered sugar - 25 g;
mint - 5 branches.

Wash strawberries, mint and bananas thoroughly and pat dry. It is better to use mint leaves, remove the twigs. Strawberries, mint, icing sugar beat with a blender. Pour the prepared mass into molds, filling them halfway and place in the freezer. Peel bananas and cut into small pieces. Blend bananas with orange juice in a blender. When the strawberry puree is frozen, top it with the banana puree. Put back to freeze.

How to make popsicles from juice?

Frozen juice is the most easy way manufacturing fruit ice. Very pleasant taste has ice cream made from juice with the addition of pulp. To prepare, you need to take your favorite juice, pour into molds and place in the freezer for 25-40 minutes. Undoubtedly, ice cream, which is made from fresh pomace juice and with your own hands, will taste just great. If you use purchased purified juice without pulp to make ice, you will get transparent sweet ice.

Multi-colored fruit ice with yogurt "Berry Tale"

Such a multi-colored type of dessert turns out to be very tasty and unusual due to the addition of a fermented milk drink.

Ingredients:

orange juice - 500 ml;
powdered sugar - 125 g;
yogurt - 130 ml;
gooseberry (or any other berry) - 250 g;
juice of any fruit.

The delicacy will consist of three layers. Pour the first layer on 1/3 of the mold fruit juice. Send to freeze for 20-30 minutes. Beat the yogurt with a mixer orange juice, pour the second layer and put it in the freezer again for 20-30 minutes. gooseberries mixed with powdered sugar and grind with a blender. We get the third layer and freeze in the freezer for another 20-30 minutes.

Fruit ice with Cherry Queen sugar syrup

Ingredients:

fresh cherry - 500 g;
purified water - 100 ml;
sugar - 120 g.

Pour sugar into a saucepan and pour water. Place over moderate heat and bring to a boil, stirring constantly. Sugar should dissolve completely. Remove the syrup from the stove. Grind cherries in a blender. When the sugar syrup has partially cooled, add the cherry mousse to it. Mix everything and pour into molds. Send to freeze. When the cherry sugar ice is frozen, insert a plastic stick vertically into it and freeze until the end.

Fruit ice "Sunny mood"

Thanks to the use of these ingredients, ice cream will become softer. To begin with, gelatin should be dissolved according to the instructions on the package, and then add juice or berry puree.

Ingredients:

purified water - 420 ml;
peach or apricot puree - 1 tbsp;
gelatin - 7 g;
sugar - 250 g;
lemon juice- taste.

First of all, fill a small package of gelatin with water according to the instructions on the package and let it swell. Pour sugar into the rest of the water, put the pan on a small fire and let it boil, stirring constantly. Then add the swollen gelatin, wait until it is all dissolved and remove from heat. When the syrup has cooled down a little, add fruit puree and lemon juice. You should not add fruit puree to hot syrup, as you will destroy the vitamins. Skip the mass that turned out through a sieve, pour into glasses and send to the freezer.

kiwi - 200 g;
sugar - 120 g;
lemon juice - 1 tsp;
potato starch - 1 tsp;
water - 200 ml;
citric acid - at the tip of a knife.

Kiwi should be washed and peeled beforehand. Then cut it into pieces and grind with a blender. Add 150 ml of water to sugar, put on the stove and prepare the syrup, stirring constantly. Adding citric acid as soon as the syrup boils. In the remaining water, dilute the starch, add to the syrup, mix. Cook for 3 minutes, remove from heat and let cool. We spread the kiwi puree to the cooled syrup and mix thoroughly with a whisk or mixer. Pour into glasses and send to the freezer. When the mass thickens a little, insert the sticks and back into the freezer until completely frozen.

Fruit ice from Coca-Cola "Cola"

Dessert with cola will not be useful, since coca-cola (as well as other sweet carbonated drinks) contains great amount sugar, dyes and other harmful ingredients. However, if you want to pamper yourself no matter what, you should pour cola into molds and freeze in the refrigerator. Fruit ice is ready!

How to freeze ice quickly?

In order for the syrups to freeze quickly, it is necessary to pour them in portions into small molds and keep them in the freezer at very low temperatures. Under these conditions, the ice freezes for about 20-30 minutes, the duration of freezing directly depends on the power of the freezer in your refrigerator.

Hawaiian ice cream - shaved ice

Hawaiian ice cream has conquered many people, and on Russian market is actively in demand. This is not just fruit ice, but ordinary ice crushed into thin chips. The finished portion of shaved ice is poured with various sugar syrups to taste, and also add nuts, condensed milk, halva, jams and aromatic herbs to Hawaiian ice cream. Crushed ice is obtained using a special machine called a shaver.

The main subtleties of preparing a cold dessert

It is not recommended to store popsicles for a long time in the freezer. If the dessert is left in the refrigerator for a long time, then it becomes very hard. Since the liquid increases in volume during freezing, it is necessary to leave half a centimeter from the edge when pouring into molds.
Layered ice cream looks beautiful.
Coffee or tea can be used to make popsicles by brewing, cooling and then freezing them. This way you get coffee ice or tea ice.
To easily remove the frozen dessert from the mold, place it in the mold for two seconds. warm water. Now the question is "how to get the ice out of the mold?" disappears and it's great. It is not necessary to use special forms for ice cream, disposable cups and yogurt cups are quite suitable.
Prepare juice and puree from berries or fruits right before making dessert. You can add whole fruits and berries to the delicacy, it will be very beautiful and tasty.

Now you have learned how to make popsicles at home. Dare, fantasize and enjoy your own original tastes!

At first glance, freezing ice is not difficult, but in the end, the ice cubes turn out to be cloudy and with bubbles. And in cocktails served in cafes and restaurants, ice is always transparent and very attractive. Let's try to make transparent ice yourself at home.

There is a scientific basis for this fact. As you know, there are microscopic air bubbles and various impurities in the water. Freezing of ice cubes occurs gradually, starting from the mold walls. Frozen water pushes air towards the center, and then, as it freezes, air bubbles give the ice cube a cloudy color.

How to freeze clear ice: proven methods

Method number 1: Freeze boiled water

For this method, water must be passed through a filter, then boiled for several minutes. During bubbling, excess air will be released from the water. After that, you need to wait for the water to cool down. natural way. If you boil water in a pan, then during the cooling period, the pan must be covered with a lid or cloth to prevent dust from settling into the water.

Now the water can be poured into molds for freezing and sent to the freezer. After 24 hours, you will be able to extract completely transparent ice from the molds.

Watch the video: The Chips for Life channel will talk about two guaranteed ways to make (freeze) transparent ice

Method #2: How to Freeze Ice in a Plastic Container

Here we need a plastic container-refrigerator that can hold the temperature. It will help the ice freeze slowly. The main thing is that the box fits in size into the freezer compartment.

Put ice cube trays in a container and fill them with clean water. Normal will do too tap water, but it needs to be filtered first.

We fill the bottom of the container with water so that the water is poured according to the water level in the molds. This water will allow the ice to freeze in the molds from top to bottom.

We put the box in the freezer, without covering the lid tightly. The temperature in the freezer should not be very low, approximately -8 ºС.

After 24 hours, take out the frozen bottom of the box along with the molds. We beat off excess ice around the mold, and take out transparent cubes from the molds.

Method #3: Slow Freeze Method

This method involves using the highest possible temperature in your freezer. The desired value is -1ºС. Forms with filtered water are placed on the top shelf of the freezer. It is advisable to wrap the forms with cling film. In a day, clear ice will be ready.

Method #4: How to make clear ice with salt

To do this, put salt in a bowl. The amount of salt should be sufficient so that the water does not freeze in the freezer at a temperature not lower than -2ºС. As you know, salt water freezes at a lower temperature than fresh water.

To begin with, put salt water in the freezer and cool it as much as possible. We place molds with water in cold salty water. It remains to send this design to the freezer for a day. Clear ice prepared in this way is provided to you.

Ideal transparent ice is obtained using special ice makers, but you are unlikely to want to install such a unit in your home.

Watch the video on the channel "Svoimi rukami" - How to make ice from distilled water